Filter
Top Products
MasterSwitch VM User’s Guide 14
MasterSwitch VM
Menu Items
Outlets
Control actions
Outlet Control Actions may be performed on individual outlets (by
Individual Outlet Control) or on all accessible outlets as a group (by
Master Outlet Control). A Control Action can only be applied to an outlet
that is not executing a command. If there is a command pending, the
State will be displayed orange.
†
Applies only when using Master Outlet Control
Continued on next page
Item Definition
Immediate On Turns outlet on.
Immediate Off Turns outlet off.
Immediate Reboot
Turns off the outlet immediately, waits the outlet’s Reboot
Duration time, and turns the outlet back on. For further
explanation, see the Immediate Reboot sequence diagram on
page 4
.
Delayed On
Turns on the outlet according to its Power On Delay. For further
explanation, see the Delayed On sequence diagram on page 5
.
Delayed Off
Turns off the outlet according to its Power Off Delay. For further
explanation, see the Delayed Off sequence diagram on page 5
.
Sequenced
Reboot
†
Immediately powers off all outlets. Each outlet waits the longest
Reboot Duration time plus its own Power On Delay and then
turns on.
Note
:
The longest Reboot Duration is the longest Reboot
Duration (in seconds) in the set of outlets.
Delayed Reboot
Turns an outlet off after the outlet’s Power Off Delay expires.
Once the outlet’s Reboot Duration expires, the outlet is turned
on. For further explanation, see the Delayed Reboot sequence
diagram on
page 7
.
Delayed
Sequenced
Reboot
†
Turns off each outlet after its Power Off Delay. Once the outlets
are turned off, each outlet waits the longest Reboot Duration
time plus its own Power On Delay. When this delay expires, the
outlet turns on.
Note
:
The longest Reboot Duration is the longest Reboot
Duration (in seconds) in the set of outlets.
Cancel
Cancel all pending commands for the outlet(s).
Note
:
Outlet State is displayed in orange with an asterisk (*)
whenacommandispendingfortheoutlet(s).