Filter
Top Products
Install the Switched Rack PDU
Switched Rack PDU Installation and Quick-Start Manual 5
a. Insert a caged nut (provided with the enclosure) above and
below a notched hole on each vertical mounting rail in your
chosen location.
b. Align the mounting holes of the brackets with the installed
caged nuts. Insert and tighten screws.
Install using the rubber
feet (provided)
1. Attach the rubber feet to the bottom of the Switched Rack PDU,
placing one in each corner.
2. Place the PDU on an even surface, where it will be accessible for
connection procedures.