Filter
Top Products
Unpacking and Preliminary Inspection
• Inspect the entire shipping container for damage or signs of mishandling before unpacking the unit.
• Remove the cardboard packing and further inspect the unit for any obvious shipping damages.
• If damage found is a result of shipping or handling, immediately file a claim with the shipping company and
forward a copy to APC.
Storage
The unit should be stored in a clean, dry environment. Storage temperature is -40
o
C (-40
o
F) to +60
o
C (+140
o
F). Avoid exposing
the unit to areas of high condensation. All of the packaging materials should be left intact until the unit is ready for
installation. If the unit has been stored for an extended period of time, it may be necessary to clean the unit and make a
complete inspection of the unit prior to installing and placing into service.
LOCATION CONSIDERATIONS
The following paragraphs provide information and guidance about what should be taken into consideration before installing
an APC SPD.
Environment
The unit is designed to operate indoors in an ambient temperature* range of -40
o
C (-40
o
F) to +60
o
C (+140
o
F) with a
relative humidity of 0% to 95% non-condensing. The standard unit is in a NEMA Type 1 industrial use enclosure which is
intended for indoor use. Primarily, it provides a degree of protection against contact with the enclosed equipment. It should
not be installed in areas with excessive dust, flammable materials, corrosive vapors or explosive atmospheres.
*Surge Counter option/feature has an operating temperature range of -0
o
C (32
o
F) to +60
o
C (+140
o
F)
Audible Noise
The unit background noise is negligible, and does not restrict the location of the installation.
Mounting and Cabinet Data
The PM Series is designed to be wall mounted. Unit model sizes and weights are defined in Table 1.
Page 2
Table 1: PM3, PM4, and PM4Y Dimensions and Weights
Model Number
D"52.6xH"21xW"21
)mc31.61x84.03x84.03(
thgieWgnippihS/thgieW
D"52.6xH"61xW"41
)mc31.61x46.04x65.53(
thgieWgnippihS/thgieW
3PMP)gk34.11/34.01(.sbl52/32D3PMP
)
gk15.41/51.31(.sbl23/92
4PMP)gk34.11/34.01(.sbl52/32D4PMP
)
gk15.41/51.31(.sbl23/92
3FMP)gk34.11/34.01(.sbl52/32D3FMP
)
gk15.41/51.31(.sbl23/92
4FMP)gk34.11/34.01(.sbl52/32D4FMP
)
gk15.41/51.31(.sbl23/92
3LMP)gk34.11/34.01(.sbl52/32D3GMP
)
gk15.41/51.31(.sbl23/92
4LMP)gk34.11/34.01(.sbl52/32D4GMP
)
gk15.41/51.31(.sbl23/92
3GMP)gk34.11/34.01(.sbl52/32D3LMP
)
gk15.41/51.31(.sbl23/92
4GMP)gk34.11/34.01(.sbl52/32D4LMP
)
gk15.41/51.31(.sbl23/92
S3LMP)gk97.11/88.01(.sbl62/42SD4LMP
)
gk69.41/06.31(.sbl33/03
S4GMP)gk97.11/88.01(.sbl62/42SD4GMP
)
gk69.41/06.31(.sbl33/03
S4LMP)gk97.11/88.01(.sbl62/42
D"7xH"42xW"42
)mc8.71x0.16x0.16(
thgieWgnippihS/thgieW
S3FMP)gk97.11/88.01(.sbl62/42LD/CD/Y4LMP
)
gk43.53/54.92(.sbl87/56