Filter
Top Products
Product Reference
2–73
Table 2–53. Functions on Each SETUP Page
Page Menu Name Functions
1 Standard (CMOS/EEPROM)
Configuration
Set date and time
Define floppy drives
Define IDE hard disks
Select video type
Display DRAM quantity
Set error halt conditions
Enable/disable video shadow RAM
Set POST display option
2 Options/Peripheral
Configuration
Enable/disable extended BIOS functions
Enable/disable serial ports
Enable/disable parallel port
Enable/disable floppy interface
Enable/disable IDE interface
Enable/disable hot key access to SETUP
Set video display state
Select POST display option
Configure byte-wide socket
Enable/disable serial boot loader
Enable/disable watchdog timer
Configure video display
3 Extended Serial Console
Configuration
Configure serial port parameters for serial
console output
Configure serial port output handshake option
Configure serial port parameters for serial
console input
Delete/include console port from DOS COM
table
* SETUP pages 3 and 4 are available when you enable Extended BIOS from SETUP
Note
Some SETUP options can put systems into an unrecoverable state; a
display option can be set preventing the SETUP screens from being
seen. Installing a jumper between J11-7 and J11-8 (Serial 1 DTR and
RI) temporarily sets all SETUP functions to their default state,
bypassing the SETUP parameters stored in the configuration memory
so that SETUP can be reentered and the problem corrected.