Filter
Top Products
Menu System
28
5200 User’s Manual
Menu Command “continued”
Menu-Utility
Several projector set-up and configuration commands are found under the Utility
command.
Orient
Allows the user to select the desired projection application for the following modes.
Front-Floor, Front-Ceiling, Rear-Floor and Rear-Ceiling. Press the Orient button to
access the pop-up option box.
Freeze
Toggle Function. Use the Freeze command to freeze the motion of the projected image.
Patterns
Use the Patterns command to display a variety of test patterns or your own bitmap
images. See Patterns List Box.
Configure
The configure options allows the user to set some additional operating parameters of the
projector. Parameters such as, Menu Timeout, Enable External RS232 control and
selecting which communication port to use.
Usage
Usage provides the user with the projector’s serial number and elapsed time on the
Lamp, Projector and PC. When installing a new lamp, reset the lamp elapsed time. See
Usage items.
Auto Search
The Auto-Search option box allows the user to enable or disable the Auto-Search mode
of operation.
Menu-Service
Password Required
Only qualified personnel use the Service command.