Filter
Top Products
Overview
2
NI Series WebConsole & Programming Guide
Related Documents
For detailed descriptions of NI Controller hardware, including specifications, port assignments,
installation procedures, connection and wiring information, refer to the Hardware Reference Guide for
your Master:
Quick Setup and Configuration Overview
Installation Procedures
The general steps involved with most common installations of this device include:
Unpack and confirm the contents of box (see the Specifications tables in the Hardware
Reference Guide for each Controller).
Connect all rear panel components and supply power to the NI Controller from the external
power supply.
Configuration and Communication
The general steps involved with setting up and communicating with the NI Controllers’ on-board Master.
In the initial communication process:
Set the communication speed on the front Configuration DIP switch (default = 38400).
Connect and communicate with the on-board Master via the Program port.
Set the System Value being used with the on-board Master.
Re-assign any Device values.
You can then either get a DHCP Address for the on-board Master or assign a Static IP to the
on-board Master.
Once the IP information is determined, rework the parameters for Master Communication in
order to connect to the on-board Master via the Ethernet and not the Program port.
Related Documents
Title
NXI-700/900 NetLinx Integrated Controllers - Hardware Reference Guide
NXI-x000 NetLinx Integrated Controllers - Hardware Reference Guide (NI-2000, NI-3000, NI-4000)
NXI-x100 NetLinx Integrated Controllers - Hardware Reference Guide (NI-2100, NI-3100, NI-4100)
NXC-ME260/64 NetLinx Master-Ethernet Card/Module - Hardware Reference Guide
NetLinx CardFrame, Control Cards, and NetModules Instruction Manual
NetLinx Studio v2.4 or higher Instruction Manual
NetLinx Programming Language Reference Guide
All product documentation is available to view or download from www.amx.com.