Filter
Top Products
ADSP-21020
REV. C
–8–
Table II. Condition and Termination Codes
Name Description
eq ALU equal to zero
ne ALU not equal to zero
ge ALU greater than or equal to zero
lt ALU less than zero
le ALU less than or equal to zero
gt ALU greater than zero
ac ALU carry
not ac Not ALU carry
av ALU overflow
not av Not ALU overflow
mv Multiplier overflow
not mv Not multiplier overflow
ms Multiplier sign
not ms Not multiplier sign
sv Shifter overflow
not sv Not shifter overflow
sz Shifter zero
not sz Not shifter zero
flag0_in Flag 0
not flag0_in Not Flag 0
flag1_in Flag 1
not flag1_in Not Flag l
flag2_in Flag 2
not flag2_in Not Flag 2
flag3_in Flag 3
not flag3_in Not Flag 3
tf Bit test flag
not tf Not bit test flag
lce Loop counter expired (DO UNTIL)
not lce Loop counter not expired (IF)
forever Always False (DO UNTIL)
true Always True (IF)
In a conditional instruction, the execution of the entire instruction is based on
the specified condition.
IMMEDIATE MOVE INSTRUCTIONS
14a. DM(<addr32>) = ureg ;
PM(<addr24>)
14b. ureg = DM(<addr32>) ;
PM(<addr24>)
15a. DM(<data32>, Ia) = ureg;
PM(< data24>, Ic)
15b. ureg = DM(<data32>, Ia) ;
PM(<data24>, Ic)
16. DM(Ia, Mb) = <data32>;
PM(Ic, Md)
17. ureg = <data32>;
MISCELLANEOUS INSTRUCTIONS
18. BIT SET sreg <data32>;
CLR
TGL
TST
XOR
19a. MODIFY (Ia, <data32>)|;
(Ic, <data32>)|
19b. BITREV (Ia, <data32>) ;
20. |PUSH LOOP , PUSH STS ;
|POP POP
21. NOP ;
22. IDLE ;
Table I. Syntax Notation Conventions
Notation Meaning
UPPERCASE Explicit syntax—assembler keyword (nota-
tion only; assembler is not case-sensitive
and lowercase is the preferred programming
convention)
; Instruction terminator
, Separates parallel operations in an
instruction
italics Optional part of instruction
| between lines | List of options (choose one)
<datan> n-bit immediate data value
<addrn> n-bit immediate address value
<reladdrn> n-bit immediate PC-relative address value
compute ALU, multiplier, shifter or multifunction
operation (from Tables IV-VII)
shiftimm Shifter immediate operation
(from Table VI)
condition Status condition (from Table II)
termination Termination condition (from Table II)
ureg Universal register (from Table III)
sreg System register (from Table III)
dreg R15-R0, F15-F0; register file location
Ia I7-I0; DAG1 index register
Mb M7-M0; DAG1 modify register
Ic I15-I8; DAG2 index register
Md M15-M8; DAG2 modify register