Antec V3 Computer Hardware User Manual


 
11
Size: 200 x 30 mm three-speed fan
Rated Voltage: 12V DC
Operating Voltage: 10.8V ~ 13.2V
Speed
(RPM)
Input
Current
Air Flow
Static
Pressure
Acoustic
Noise
Input
Power
High
800
0.3A
3.8 m³ / min
(134 CFM)
0.7mm-H2O (0.03 inch-
H2O)
30 dBA 3.6 W
Medium
600
0.2A
3.1 m³ / min
(108 CFM)
0.4mm-H2O (0.02 inch-
H2O)
27 dBA 2.0 W
Low
400
0.1A
2.3 m³ / min
(82 CFM)
0.2mm-H2O (0.01 inch-
H2O)
24 dBA 1.0 W
4.2 Front/Rear TriCool™ Blue LED Fans
The Nine Hundred Two V3 comes with two pre-installed 120 x 25 mm blue LED fans, one in front of each
HDD cage to cool the hard drives. These fans are installed so the air will be blown into the case. Each fan
comes with a speed control knob at the front of the faceplate. Turn the knob clockwise to increase the
speed. The lowest speed is 1200 RPM while the highest speed is 2000 RPM. See the chart below to view
the appropriate specifications.
There is one 120 x 25 mm TriCool™ blue LED fan pre-installed at the rear of the case. This fan is installed
so the air will be blown out of the case. It has a three-speed switch that lets you choose between quiet,
performance, or maximum cooling. This switch is located at the rear of the case. The default fan speed
setting is Low.