Filter
Top Products
Connection and preparation o
10
f the monitor
ty and that of the monitor, use only the specified
ck. At least 6cm of clearance will be needed between
rt the
the ventilation slots
herever the monitor is installed.
in a confined space.
consumes a small amount of power in standby mode.
ut it should be unplugged from the power socket if it is not to be used for
Installing the monitor on the wall
The monitor conforms to the wall-mounted VESA standard. Please refer to
the instructions for product specifications and details.
To ensure your own safe
wall-mounting bracket. Please note that wall mounting must be done by a
professional technician.
When the monitor is mounted on a wall it must be possible to access the
connectors at the ba
the monitor and the wall to ensure that there is enough space to inse
connection cables.
It is important that air should flow freely through
w
Do not install the monitor
Power connection
Insert one end of the power cord into the “Power Input” socket on the back
and plug the other end into a 220V power socket.
The monitor
B
some time.