APC 200-240 V Power Supply User Manual


 
Smart-UPS X 2000/2200/3000 VA 2
Rear panel
Specifications
Operating Conditions
This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the
UPS and XLBP.
Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the
specified limits.
This unit has front and rear air vents. Allow adequate space for proper ventilation.
Environmental Specifications
Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short
duration discharges will shorten battery life.
For additional specifications, see the APC Web site at www.apc.com.
SmartSlot
Controllable Outlet Group 3
UPS input
External battery pack connector
Ground screw
EPO connector
Controllable Outlet Group 1
Serial port
Controllable Outlet Group 2
USB port
2200 VA Low Voltage 2000 VA Low Voltage
3000 VA Low Voltage 2200/3000 VA High Voltage
Temperature
Operating 0° to 40° C (32° to 104° F)
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity
0% to 95% relative humidity, non-condensing
su0494a
su0492a
su0495a
su0493a