APC 200-240 V Power Supply User Manual


 
Smart-UPS X 2000/2200/3000 VA 6
Load (A) x
Load meter (kWh) x
Last transfer to battery power information x x
Battery charge and estimated run time x x
Battery voltage x
Number of external battery packs x
Internal battery temperature x
Run time calibration test results x x
Self-test results x x
Status of the switched outlet group(s): On,
Off, Sleep, Reboot, Turning On, Turning Off
x
Smart Slot information (if applicable) x
Configuration
Language x x
Local power quality x x
Standard or Advanced menus x x
Audible alarms x x
High and low transfer points x
Low run time warning x
Green mode (enable/disable) x
Output voltage x x
Battery self-test interval x x
Battery installation date x x
UPS firmware update (only available when
output is off)
xx
UPS setup wizard x x
Reset to factory defaults x x
Switched outlet group(s) delays and settings x
Smart Slot configuration (if applicable) x
Control
Switched outlet group(s): Turn on, turn off,
put to sleep, or reboot
x
Test & Diagnostics
UPS self-test. x x
Runtime calibration test. x x
Alarm and display test. x x
Statistics
Statistics about transfers to battery power,
time on battery, and total operating time
x
Logs
Transfer log x
Status log x
Fault log x
Main Menu Overview Standard Advanced