Filter
Top Products
Page 15
4.0 Installation
4.4 Connect battery pack - continued
Note: The number of 2000VA model Battery packs that may be connected is limited only
by the recharge time desired - see section 9.9.
4.5 Connect UPS to service and enable
4.5.1 Connect UPS to service
■ 120 Vac versions
Plug the UPS into a two-pole, three wire grounding receptacle
only. Avoid the use of extension cords and adapter plugs.
Note: Leave adequate space for cooling.
Typical 2000VA model multiple Battery pack installation - 120 Vac version
shown.