Filter
Top Products
®
REFERENCE GUIDE
Management Information Base
4
There are three categories under [products]:
• [hardware] contains sub-categories for each type of hardware product that you can
manage using PowerNet MIB OIDs.
• [software] contains one sub-category, [powerNetSubAgent], of read-only OIDs to
monitor a software PowerNet agent only.
• [system] contains read-only OIDs that identify models of APC UPSs and other APC
devices by unique numbers that other OIDs can reference. For example, the system
OIDs in other OID categories of the PowerNet MIB use a PowerNet MIB [system]
OID number for the MIB-II’s [sysObjectID] value.
Tabled OIDs
For any PowerNet MIB OID category listed in the SNMP browser, you can access a list
of the current values for all OIDs in that category and in all sub-categories below it in
the hierarchy, except OIDs grouped in a table. To access the current values of OIDs in
an OID table, select the OID table (always enclosed in braces {}) in the SNMP browser.
For example, to access the OIDs that define all four trap receivers that you can
configure through SNMP for a device, select {mconfigTrapReceiverTable} in the
SNMP browser.
See Manage Agents and Management Cards.