Filter
Top Products
®
REFERENCE GUIDE
Management Information Base
8
Enable APC traps to use a specific argument type
Use the [mtrapargs] OIDs to enable APC traps to use an argument of a specific type
(integer, IP address, octet string, Gauge, or TimeTicks), which may not be defined as
part of the APC MIB.
mtrapsapargsInteger
mtrapsapargsIpAddress
mtrapsapargsString
mtrapsapargsGauge
mtrapsapargsTimeTicks
Enable transfer of any file that is supported by the Management Card
Use the [mfiletransfer] OIDs to allow the transfer of any type of file that the
Management Card can recognize. The [mfiletransfer] OIDs are in three sub-
categories: [mfiletransferStatus], [mfiletransferConfig], and
[mfiletransferControl].
View the results of the most recent file transfer attempt. Use the one OID in the
[mfiletransferStatus] category to find out whether the most recent attempt to transfer
a file succeeded or failed, and if it failed, the reason for the failure.
Provide the required parameters to transfer the file. Use the OIDs in the three
subcategories under the [mfiletransferConfig] to provide the following parameters
needed to transfer the file:
• The file name and path
• The IP address for the remote TFTP server (if you are using TFTP for the transfer)
• The IP address, user name, and password for the remote FTP server (if you are
using FTP for the file transfer)
The [mfiletransferConfigSettings] subcategory has one OID:
mfiletransferConfigSettingsFileName
The [mfiletransferConfigTFTP] subcategory has one OID:
mfiletransferConfigTFTPServerAddress