Filter
Top Products
Environmental Monitoring Unit: User’s Guide 3
Managing the Unit
Web Interface
System
requirements
To access the Web interface, you need one of the following supported
Web browsers:
• Internet Explorer 3.0.2 and later
• Netscape 3.0 and later
Note: Some Web interface features (data verification,
APC
Interactive
Assistant, and
MD5
authentication) require that you enable Java
Script and/or Java. For
MD5
to function properly, you must also
have cookies enabled on your Web browser.
Access to the Web
interface
Only one user at a time may access the Environmental Monitoring Unit.
Serial interface users have precedence over Telnet users and Telnet
users have precedence over Web users.
In the URL Location field of your Web browser, type
http://
followed
by your unit’s IP address. For example:
http://170.241.17.51
Note: Alternatively, you can enter the DNS name (if a DNS server
entry is configured for the unit’s management card).
If the unit’s Web port is set to a value other than 80, enter the System IP
address, a colon and the port value (in this example 8000).
http://170.241.17.51:8000
Logging in
After entering the Environmental Monitoring Unit’s IP address, press
E
NTER
. At the prompts, enter your user name and password (apc by
default for both).
Note: To change the user name, password, or time-out value, see
User Manager on page 16.