Filter
Top Products
Environmental Monitoring Unit: User’s Guide 4
Managing the Unit
Control Console
Options for using
the Control
Console
The Control Console provides comprehensive management of the unit
by one of the following modes of access:
• Telnet, for remote management
• A serial interface for local management
Access to the
Control Console
Only one user at a time may access the Environmental Monitoring Unitt.
Serial interface users have precedence over Telnet users, and Telnet
users have precedence over Web users.
Use a serial interface to access the Control Console:
1. Use the supplied configuration cable (APC part number 940-
0120) to connect the terminal port to one of the Probe Ports on
the Environmental Monitoring Unit.
2. Set the terminal port for the following communication settings:
3. To change the communications settings using HyperTerminal:
a. Make the needed changes.
b. Select
Disconnect in the Call menu.
c. Select
Connect in the Call menu.
d. Press E
NTER
4. Log into the Control Console. (See Logging in on this page.)
Logging in
When prompted, enter the Administrator user name and password (
apc,
by default, for both).
To change the user name, password, or timeout value, see
User
Manager on page 16
.
Continued on next page
Baud Rate 2400
Data Bits 8
Stop Bits 1
Parity None
Handshaking None
Local Echo Off
Terminal Type
ANSI
(
VT100
)