Filter
Top Products
Environmental Monitoring Unit: User’s Guide 12
Menu Items
Network
Purpose
The
Network menu provides access to the configurable network
settings. Only the Administrator can access the
Network menu.
TCP/IP
The TCP/IP section lists the Environmental Monitoring Unit’s start-up
settings for network service and allows you to configure TCP/IP
settings.
.
TFTP/FTP
Use the TFTP/FTP section to control file transfers through the settings
for the TFTP and FTP Client and FTP Server.
Continued on next page
Item
ItemItem
Item Definition
DefinitionDefinition
Definition
System
IP
The unit’s Internet Protocol address, which is a numeric address
that the domain name server translates into a domain name.
Subnet Mask A 32-bit character string used to select some of the bits from an
Internet address to route it to the subnet.
Default Gateway A device that connects two computer networks that use different
protocols so that the connected networks can exchange data.
Default: Router address
BOOTP
A protocol used to enable a diskless workstation to find its own
logical IP address at startup.
Settings: Enabled/Disabled
Client or Server
Client or ServerClient or Server
Client or Server Item
ItemItem
Item Definition
DefinitionDefinition
Definition
TFTP Client Remote Server IP: The network address of the
TFTP
server used for downloads.
FTP Client Remote Server IP: The network address of the
FTP
server used for downloads.
User Name The user name for access to the
FTP
server.
Password: The password for access to the
FTP
server.
FTP Server Access: Enables or disables
FTP
server
access.
Port: The
TCP/IP
port on which the
FTP
server for the unit’s management
card is located.
Default: port
21