Filter
Top Products
53UPS Network Management Card 2 User’s Guide
To display the data log (Logs > Data > log):
• By default, view the data log as a page of the Web interface. The most recent data item is recorded
on page 1. From the navigation menu below the log:
– Click a page number to open a specific page of the log.
– Click Previous or Next to view the data recorded immediately before or after the data that is
listed on the open page.
– Click << to return to the first page of the log, or click >> to view the last page of the log.
• To see the listed data on one page, click Launch Log in New Window from the data log page to
display a full-screen view of the log.
Note: In your browser's options, JavaScript
®
must be enabled for you to use the
Launch Log in New Window button.
Alternatively, you can use FTP or SCP to view the data log. See “How to use FTP or
SCP to retrieve log files” on page 54.
To filter the log by date or time (Logs > Data > log):
To display the entire data log, or to change the number of days or weeks for which the log displays the
most recent events, select Last. Select a time range from the drop-down menu, then click Apply. The
filter configuration is saved until the device restarts.
To display data logged during a specific time range, select From. Specify the beginning and ending
times (using the 24-hour clock format) and dates for which to display data, then click Apply. The filter
configuration is saved until the device restarts.
To delete the data log:
To delete all data recorded in the log, click Clear Data Log on the Web page that displays the log.
Deleted data cannot be retrieved.
To set the data collection interval (Logs > Data > interval):
Define, in the Log Interval setting, how frequently data is sampled and stored in the data log, and view
the calculation of how many days of data the log can store, based on the interval you selected. When the
log is full, the oldest entries are deleted. To avoid automatic deletion of older data, enable and configure
data log rotation, described in the next section.
To configure data log rotation (Logs > Data > rotation):
Set up a password-protected data log repository on a specified FTP server. Enabling rotation causes the
contents of the data log to be appended to the file you specify by name and location. Updates to this file
occur at the upload interval you specify.
Parameter Description
Data Log Rotation Enable or disable (the default) data log rotation.
FTP Server Address The location of the FTP server where the data repository file is stored.