Filter
Top Products
UPS Network Management Card 2 User’s Guide64
• by IP: the IP address of the server
• by MX: the Mail Exchange used by the server
–As Query Question, identify the value to be used for the selected query type:
– View the result of the test DNS request in the Last Query Response field.
Web
Path: Administration > Network > Web > options
Query Type Selected Query Question to Use
by Host The URL
by FQDN The fully qualified domain name,
my_server.my_domain.
by IP The IP address
by MX The Mail Exchange address
Option Description
access To activate changes to any of these selections, log off from the Management Card:
• Disable: Disables access to the Web interface. (To re-enable access, log in to the command line
interface, then type the command http -S enable. For HTTPS access, type https -S
enable.)
• Enable HTTP (the default): Enables Hypertext Transfer Protocol (HTTP), which provides
Web access by user name and password, but does not encrypt user names, passwords, and data
during transmission.
• Enable HTTPS: Enables Hypertext Transfer Protocol (HTTPS) over Secure Sockets Layer
(SSL). SSL encrypts user names, passwords, and data during transmission, and authenticates
the Management Card by digital certificate. When HTTPS is enabled, your browser displays a
small lock icon.
See “Creating and Installing Digital Certificates” in the Security Handbook on the APC Network
Management Card Utility CD to choose among the several methods for using digital certificates.
HTTP Port: The TCP/IP port (80 by default) used to communicate by HTTP with the
Management Card.
HTTPS Port: The TCP/IP port (443 by default) used to communicate by HTTPS with the
Management Card.
For either of these ports, you can change the port setting to any unused port from 5000 to 32768
for additional security. Users must then use a colon (:) in the address field of the browser to
specify the port number. For example, for a port number of 5000 and an IP address of
152.214.12.114:
http://152.214.12.114:5000
https://152.214.12.114:5000