Filter
Top Products
APC KVM Switch Installer/User Guide
20
Setting the ID Window Dwell Time
This menu selection lets you set the time that the ID Window remains on screen
after a channel switch. Each channel can be confi gured independently. The
default time is set for fi ve seconds.
1. Highlight the channel you wish to change in the main OSD Window.
2. From the main OSD Window, press the Control key twice to access the
Administrator Command Menu.
3. Select ‘Edit Channel’ from the Command Menu.
4. Choose the option ‘ID Dwell Time’.
5. Enter a number between 0-255 seconds. Entering 0 disables the ID Window.
Entering 255 allows the ID Window to stay on screen the entire time
the channel is active.
5. Press Enter to accept the changes or press Esc to exit the menu without
saving the changes.