Filter
Top Products
Operation
Engage the System
1. Lift the shield on any of the installed EPO
boxes and press the button. A red ag will
drop down from the box, providing an easy
visual mark as to which EPO box in your room
has been activated.
Reset the EPO System
1. Pull the button towards you (1) and push the
ag up until it catches (2). Pulling the button
does not bring power back to the connected
equipment; it only resets the EPO system.
Close the shield after resetting the system.
1
2
14
Emergency Power Off System Installation and Operation
990–1611C-001