Filter
Top Products
4
3: OPERATION
Front Display Panel
110/120 V 230 V
INDICATOR DESCRIPTION
On Line
The UPS is supplying utility power to the connected equipment.
On Battery
The UPS is supplying battery power to the connected equipment.
Overload
The connected loads are drawing more than the UPS power rating.
Replace Battery
The battery must be replaced.
FEATURE FUNCTION
Power Button
Press this button to turn the UPS on or off. (Read on for additional capabilities.)
Self-Test Automatic: The UPS performs a self-test automatically when turned on, and
every two weeks thereafter (by default). During the self-test, the UPS briefly
operates the connected equipment on battery.
Manual: Press and hold the
button for a few seconds to initiate the self-test.
Cold Start Supply battery power to the UPS and connected equipment in the absence of
utility voltage (see Troubleshooting). Press the
button for one second and
release. The UPS will beep briefly and go quiet. Press and hold the button again,
but for approximately three seconds. The unit will emit a sustained beep. Re-
lease the button during this beep.