Filter
Top Products
Change the Date and Time
1. Select Admin and press ENTER.
UPS Alarms
Power Dist Log
Switch Gear → Admin
Environment Help
2. Select Date/Time and press ENTER.
Network Setup
Local Interface
→ Date/Time
Device ID
3. Select Date or Time and change the settings
by using the UP and DOWN arrow keys. Press
ENTER to save the changes.
Mode: Manual
Format: mm/dd/yyyy
Date: xx/xx/xxxx
Time: xx:xx:xx
Congure Input Contacts
1. Select Environment and press ENTER.
UPS Alarms
Power Dist Log
Switch Gear Admin
→ Environment Help
2. Select Input Contacts and press ENTER.
→ Input Contacts
Output Relays
Alarm Relay Map
3. Select desired output relay, 1 through 4, select
Conguration, and press ENTER.
Input Contact:xof4
<contact name>
Status: Normal
→ Configuration
4. Change the settings for name/location, alarms,
severity, and normal state.
Name/Location x
Alarms: Enabled
Severity: Critical
Normal: Open
22
Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation
990–3015E-001