Filter
Top Products
Replace a Power Distribution Module
Note: The load that is connected to the actual power distribution module will not be
supported when the locking latch on the module is opened.
1. Switch the breakers to the OFF position.
2. Disconnect the power cable from the power distribution module’s extension cable or Rack-Mount
PDU.
3. Open the locking latch on the module and gently pull the module out of the enclosure.
4. Take the replacement power distribution module and open the locking latch. Route the power
cable through the top of the enclosure and slide the power distribution module into place.
5. Secure the latch to lock the module.
6. Switch the breakers to the ON position.
990–3015E-001
Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation
31