Filter
Top Products
Apex OutLook 140DX/180DX Switch User Guide
61
Troubleshooting
SYMPTOM PROBABLE CAUSE RECOMMENDED SOLUTION
Switch selects
servers at will
Scan mode enabled Turn off scanning:
Main>Commands, then clear Enabled.
Same
keystrokes or
mouse
movements
display on
one or more
servers
Broadcast mode
activated
Turn off broadcasting:
Main>Commands, then clear
Activiated.
Can only select
Port 1 on a
secondary
switch
(for example,
selecting
Port 1-4 selects
Port 1-1)
Incorrect settings in
the Device Modify
dialog box at the
primary switch
Confirm the selection of the correct
number of ports (2, 4, 8, 10) for the
secondary switch:
Main>Setup>Devices>Device Modify
Confirm that all port settings are set to
Standard if connected to servers.
Switch Behaviors