Filter
Top Products
Connecting the monitor’s base
The monitor and base are packaged separately. To connect the monitor’s base,
follow these steps:
1Place the monitor on its left side on a table or other firm surface.
2Place the base on its side facing the bottom of the monitor.
3Hook the rear latches into the holes at the rear of the monitor.
4 Insert the front latches into the slots at the front of the monitor.
5Turn the monitor upright.
Yo u ’r e finished connecting the base.
First, hook the rear latches into
the holes at the rear of the base.
Then, snap the front latches
into the slots.
6
Chapter 1