Filter
Top Products
Then follow these steps:
1 Assemble the VCR, television, microphone, and cables you need.
Be sure to use a microphone designed for your model of the Macintosh, such
as the Apple PlainTalk Microphone.
You need the following cables (available at an electronics supply store):
m Video cable with S-video connectors or RCA plugs at each end. (If you’re
using a video cable with RCA plugs, you’ll also need the adapter cable for
composite video.)
m Audio cable with dual RCA plugs at one end and a 3.5-mm stereo miniplug
at the other end.
m A cable to connect your VCR to your television.
Use a cable with an RCA or S-video plug to connect the VCR to the
television. Do not use coaxial cable.
You can also use an all-in-one cable (with one video and two audio RCA
plugsat each end) if you attach appropriate adapters.
IMPORTANT
A Y-shaped adapter is supplied with the round microphone for
some models of the Macintosh. This adapter is not compatible with your
Power Macintosh.
2Attach one end of the video cable to the Video In port on the VCR.
Follow the directions that came with the VCR.
Stereo miniplug
RCA
S-video
S-video
RCA RCA
S-video
Adapter for composite video
46
Chapter 3