Filter
Top Products
3Plug the other end of the video cable (or adapter) into the S-video output port (
Æ
) on the
Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4Plug the dual RCA plugs on the audio cable into the left and right Audio In ports on
the VCR.
5Plug the stereo miniplug on the audio cable (or adapter) into the sound output port (
-
)
on the Macintosh.
6Connect the VCR’s Video Out port to the television’s Video In port.
7Connect the microphone to the sound input port (
X
) on the Macintosh.
Your finished connections should look like this:
8 Turn on the computer, the VCR, and the television.
9Select “line input” on your VCR.
See the manual that came with your VCR for instructions on how to select
the line input source.
For further instructions on how to record the computer’s output on videotape
and add voice annotation, see the “Video” topic of Macintosh Guide, available
in the Guide (h) menu.
S-video
output port
Sound
output
port
Video
In port
Audio In ports
(left and right)
3.5-mm miniplug to dual RCA-plug cable
(available at most electronics supply stores)
TV
Video
Out port
Video In port
Sound
input
port
Microphone
VCR
æ
≈
-
47
Connecting Additional Equipment