Filter
Top Products
Troubleshooting Symptom Charts/Video - 11
Video
Screen is black, boot
tone is present, drive
operates, fan is
running, and LED is
lit
1 Adjust brightness on monitor.
2 Clear parameter RAM. Hold down <Command> <Option> <P>
<R> during startup but before "Welcome to Macintosh".
3 Verify video card is installed and reseat card.
4 Reset Cuda chip. (Refer to The Cuda Chip in Basics.)
5 Reset logic board. (See Resetting the Logic Board in Basics.)
6 Replace video cable.
7 Remove all DRAM DIMMs and try replacing them one at a
time to test. Replace any bad DIMMs.
8 Replace video card.
9 Test with known-good monitor. Replace monitor if
necessary. Refer to appropriate monitor manual to
troubleshoot defective monitor.
10 Replace processor card.
11 Replace logic board. Retain customer's DIMMs.