Filter
Top Products
B) The male to male adaptor will fit in the holes
between these two pegs. Don’t force the adaptor
into the holes; simply set the long pins into the
holes, as shown.
Set adaptor in holes
C) Align the connector on the back of the GS-RAM
card with the exposed smaller pins of the male to
male connector. (GS-RAM REV A and GS-RAM
Plus REV A users, align the pins on the back of
the GS-RAM with the holes in the RamKeeper
connector.)
Align Gs-RAM connector with pins
Chapter One - Getting Started 9