Apple CPX3 Projector User Manual


 
37
SCREEN Menu
Item Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the
▲/▼
buttons on the SCREEN menu to
select SOURCE NAME and press the
button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be named
and press the ► button. Right side of the
menu is blank until a name is specied.
The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the
rst line. Use the
▲/▼/◄/►
buttons and the
ENTER or INPUT button to select and enter
characters. The RESET button can be used to
erase 1 character at a time. The name can be a
maximum of 16 characters.
(4) To change an already inserted character, press
the
button while the cursor is on the [A-N]
row to move the cursor to the name displayed on
the rst line and use the
◄/►
buttons to select
character to be changed. Once a character in the
name is selected use the
button to move the
cursor back down to the character entry area to
select and enter characters as described above.
(5) Select
and press the ENTER or INPUT buttons when nished
entering text.
To revert to the previous name without saving changes press the
ESC or ◄ button and the INPUT button simultaneously.
TEMPLATE
Using
▲/▼
buttons switches the mode for the template screen. The
selected template pattern can be displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed
(
40).
DOT-LINE4
ó
DOT-LINE3
ó
DOT-LINE2
TEST PATTERN
ó
DOT-LINE1
SCREEN Menu (continued)