Filter
Top Products
User’s Manaul
12
Configuration Guide
2.8 Configuring IPS-3101h WAN IP through Voice Prompt
2.8.1 DHCP Mode
Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use DHCP.
2.8.2 STATIC IP Mode
Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use STATIC IP mode,
then use option 02, 03, 04 to set up VoIP gateway’s IP, Subnet Mask, Gateway respectively.
2.9 Configuring IPS-3101h with Web Browser
IPS-3101h series ATA has an embedded Web server that will respond to HTTP GET/POST
requests. It also has embedded HTML pages that allow a user to configure the VoIP gateway
through a Web browser such as Microsoft’s IE and AOL’s Netscape.
2.9.1 Access the Web Configuration Menu
The IPS-3101h HTML configuration menu can be accessed via LAN or WAN port:
• From the LAN port use the default LAN gateway IP address:
http:/192.168.2.1
• The WAN port HTML configuration menu option is disabled from factory. To access
the HTML configuration menu from the WAN port, first enable the “WAN side HTTP
access” option by accessing the configuration via LAN port.
With the WAN side HTTP access enable, then get the WAN IP address of the VoIP
gateway through section 4.1 with menu option 02. Then the VoIP gateway’s Web
Configuration Menu can be accessed by the following URI via WAN port:
http://VoIP gateway-IP-Address,
where the VoIP gateway-IP-Address is the WAN IP address of the IPS-3101h.
Once this request is entered and sent from a Web browser, the IPS-3101h will respond with
the following login screen:
Welcome to ArtDio IPS-3101h
Password
Login