Filter
Top Products
User’s Manaul
23
Port Forwarding:
Allow the user to forward a matching (TCP/UDP) port to a specific
LAN IP address with a specific (TCP/UDP) port.
2.9.3 Saving the Configuration Changes
Once a change is made, the user should press the “Update” button in the Configuration Menu.
The IPS-3101h will then display the following screen to confirm that the changes have been
saved.
ArtDio IPS-3101h Configuration Update Status
Your configuration changes have been saved.
They will take effect on next reboot.
Click to view your changes
The user is recommended to power cycle the IPS-3101h after seeing the above message.
2.9.4 Rebooting the IPS-3101h from remotely
The administrator of the IPS-3101h can remotely reboot the IPS-3101h by pressing the
“Reboot” button at the bottom of the configuration menu. Once done, the following screen will
be displayed to indicate that rebooting is underway.
ArtDio IPS-3101h Rebooting Status
The IPS-3101h is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
At this point, the user can relogin to the IPS-3101h after waiting for about 30 seconds.
2.10 Configuration through a Central Server
ArtDio IPS-3101hs can be automatically configured from a central provisioning system.
The configuration file is downloaded via TFTP from the central server. A service provider or
an enterprise with large deployment of IPS-3101hs can easily manage the configuration and
service provisioning of individual devices remotely and automatically from a central server.
GAPS uses enhanced (NAT friendly) TFTP and other communication protocols to
communicate with each individual IPS-3101h even if the IPS-3101h is behind a NAT.