Filter
Top Products
5
Chapter 1. Introduction
Thank you for purchasing the FriendlyNET FX4000. This switch combines Ethernet, Fast Ethernet and
Gigabit Ethernet capabilities in a single, rack mountable unit. Combining these interfaces allows the switch
to unclog existing LANs and to provide an efficient, high speed network. The switch features a store and
forward switching scheme. Every optional module has it’s own 12K entry MAC address table to store source
addresses. The backplane of the FX4000 can reach up to 9.6 Gbps, greatly improving network performance.
The FX4000 switch, with 4 optional modular slots, can accept many different media module combinations,
allowing you great flexibility in configuring your network.
Asanté offers the following types of modules:
•
8 Port 10/100BaseTX module
• 2 Port 100BaseFX Fiber module
• 4 Port 100BaseFX Fiber module
•
1000BaseSX/LX Fiber module
• 1000BaseT Gigabit copper module
Key Features
•
Conforms to IEEE 802.3, 802.3u, 802.3z, 802.3ab and 802.3x standards
• 4 expansion slots to configure a flexible network
•
Supports half duplex mode for backpressure, and full duplex for flow control
•
Store and forward switching architecture for abnormal packet filtering
• Up to 9.6 Gbps backplane forwarding rate
•
12K entry MAC address table per module
•
3 to 5 MB memory buffer for modules
• LED indicators for Power, Speed, Link, Activity, Full Duplex and Collision
Package Contents
Unpack the box of the FX4000 switch and verify the contents against the checklist below.
• Switch
•
Power Cord
• Rack mount Kit
• Four Rubber Feet
•
User’s Manual (this document)
If any item is missing or damaged, please contact your local dealer immediately.