Asante Technologies GX5-2400W Switch User Manual


 
Asanté FriendlyNET GX5-424W/448W/2400W User’s Manual
5
Chapter 1 Introduction
Congratulations on the purchase of your FriendlyNET Smart Gigabit Ethernet switch. These
devices can switch segments running at 1000 Mbps Gigabit Ethernet, 100 Mbps Fast Ethernet,
and 10 Mbps Ethernet at full wire speeds.
The versatile GX5-W uses its on-board CPU to take the complexity out of configuring a
workgroup. Using any popular web browser, you’re only a few clicks of the mouse away from
enabling high-end services such as trunking, mirroring, virtual LANs (VLANs), and quality of
service (QoS).
Features
24 × 10/100 Mbps auto-negotiating Fast Ethernet RJ45 ports and 2 × SFP Mini-GBIC ports
(GX5-424W)
48 × 10/100 Mbps auto-negotiating Fast Ethernet RJ45 ports, 2 × 10/100/1000 Mbps auto-
negotiating Gigabit Ethernet ports, and 2 × SFP Mini-GBIC ports (GX5-448W)
24 × 10/100/1000 Mbps auto-negotiating Gigabit Ethernet ports (GX5-2400W)
Up to 4K (GX5-424W), 24K (GX5-448W), or 8K (GX5-2400W) unicast addresses entities per
device, self-learning, and table aging
768 KB (GX5-424W), 1536 KB (GX5-448W), or 400 KB (GX5-2400W) packet buffer
All RJ45 ports support Auto-Uplink™ (MDI/MDIX) for simplified wiring without crossover
cables or an uplink ports
IEEE Auto Negotiation sets full/half duplex transfer mode for 10/100 Mbps ports
Full duplex transfer mode for Gigabit ports
Wire-speed reception and transmission
Store-and-forward switching scheme capability to support rate adaptation and ensure data
integrity
Supports IEEE 802.3x flow control for full duplex mode ports
Back pressure flow control for half duplex
Supports port-based VLAN and QoS
Supports trunking on Gigabit ports
Supports port mirroring for simplified troubleshooting
Supports port-settings for speed/disable and flow control
Easy configuration via web browser
Easy setting via GX5-W Management Utility
Standard 19" rackmount size with included kit