Filter
Top Products
16
Getting Started Guide
Note: There is no uplink port on this switch. All 10/100 ports on this
switch are auto-sensing MDI/MDI-X. This advanced feature means
that the 10/100 ports will automatically determine whether the de-
vice at the other end of the link is a hub, switch or workstation, and
adjust its signals accordingly.
Although 10BaseT requires only pins 1, 2, 3 and 6, Asanté strongly
recommends cables with all 8 wires connected as follows:
1000BaseTX requires that all four pairs (8 wires) be connected cor-
rectly. Table 2-1 shows the correct pairing of all eight wires.
BR
WH/BR
GR
WH/BL
BL
WH/GR
OR
WH/OR
Pin Number Pair Number & Wire Colors
1 2 White/Orange
2 2 Orange/White
3 3 White/ Green
4 1 Blue/White
5 1 White/Blue
6 3 Green/White
7 4 White/Brown
8 4 Brown/White
Table 2-1