Filter
Top Products
7
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
BOTTOM OF THE CABINET
BACK OF THE CABINET
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
● Do not put a flammable object near this vent.
● Keep the rear grills at least 3’(1m) away from
any object, especially heat-sensitive object.
● Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
FRONT OF THE CABINET
LAMP COVER
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
● Do not cover the vent slots.
● Keep bottom clear of any objects.
Obstructions may block cooling air.
AIR INTAKE VENTS
(Side and Bottom)
PROJECTION LENS
SPEAKERS
INFRARED
REMOTE RECEIVERS
LENS COVER
POWER CORD CONNECTOR
EXHAUST VENT
TERMINALS
AND CONNECTORS
MAIN ON / OFF SWITCH
TOP CONTROLS
AND INDICATORS