Filter
Top Products
USER GUIDE LCD PANEL
17
7.1.16 FREQUENCY
This setting is usually not changed by the user. It is however provided in
case of adaptation to special graphics adapters that are close to those in
the compatibility list. A bad frequency setting can be seen as an image too
wide or too narrow, combined with vertical, unstable bands. Press the
FREQUENCY keys left or right to correct the image. The setting is stored
individually for each source.
7.1.17 POSITION
Due to minor variations in graphics adapters, the horizontal and vertical
position may need adjustment. Press POSITION, then use the cursor keys
to position the image. The position is stored.
7.1.18 MOUSE
The remote control (RC) employs a unique mouse functionality that
enables full mouse control of your PC, PS/2 or Macintosh computer. By
default, the cursor keys of the remote control emulate the mouse.
The LEFT and RIGHT keys emulate the left and right keys on a standard
two-key mouse. For Macintosh computers, the right key is not used.
The DRAG key is used to emulate the click-and-hold action. To move an
object, position the mouse cursor, press DRAG to tag the object, position
the object as desired using the cursor keys, then press DRAG again to
release the object. DRAG is automatically released 5 seconds after the last
key is pressed. The DRAG key is used to activate the pull-down menus on
the Macintosh.