Filter
Top Products
Chapter 2 24
IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave
The following screen appears if you select any of the IDE drive parameters:
The following table describes the parameters found in this menu.
Parameter Description Option
IDE HDD Auto-Detection Auto-detects your hard disk drive. [Press Enter]
IDE Channel 0 Master/Slave
IDE Channel 1 Master/Slave
Displays the device type None
Auto
Manual
Access Mode Selects the HDD access mode CHS
LBA
Large
Auto
Capacity Shows the size of your hard disk in MB. xxxxxx MB
Cylinder Shows your hard disk’s number of
cylinders.
0 to 65535
Head Shows your hard disk’s number of heads 0 to 255
Precomp Selects the Precomp number for old HDD
parking
0 to 65535
Landing Zone Selects the Landing Zone number for old
HDD parking
0 to 65535
Sector Shows your hard disk’s number of sectors 0 to 255