Filter
Top Products
ASUS A7N8X-VM/400 motherboard user guide
1-19
7. Chassis intrusion connector (4-1 pin CHASSIS1)
This connector is for a chassis designed with intrusion detection feature. The
connector requires an external detection mechanism such as a chassis
intrusion sensor or microswitch. When you remove any chassis component,
the sensor triggers and sends a high-level signal to this connector to record a
chassis intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a
jumper cap. If you wish to use the chassis intrusion detection feature, remove
the jumper cap from the pins.
A7N8X-VM
A7N8X-VM/400 Chassis Alarm Lead
CHASSIS1
+5VSB_MB
Chassis Signal
GND
(Default)
8. Front panel audio connectors (10-1 pin FP_AUDIO)
This connects the front panel audio module that allows convenient connection
and control of audio devices.
A7N8X-VM
A7N8X-VM/400 Front Panel Audio Connector
FP_AUDIO
BLINE_OUT_L
MIC2
Line out_R
Line out_L
BLINE_OUT_R
NC
MICPWR
+5VA
AGND