Filter
Top Products
56
Chapter 4: BIOS Setup
Load Performance Setting [Normal]
The [Manual] setting is the system default. Selecting [Optimal] boosts the
speed performance of the entire system. However, it should be noted that
the optimal performance setting may make the system less stable.
Configuration options: [Normal] [Optimal]
CPU VCore [1.750V]
When the CPU VCore Setting parameter is set to [Manual], this item allows
you to select a specific CPU core voltage. This field is not accessible when
the CPU VCore Setting parameter is set to [Auto]. Configuration options:
[1.750V] [1.775V] [1.800V] [1.825V] [[1.850V]
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or choose
[Disabled] to turn on or off the CPU Level 1 and Level 2 built-in cache.
Configuration options: [Disabled] [Enabled]
CPU Level 2 Cache ECC Check [Disabled]
These fields offers the default of [Disabled] or [Enabled] to turn on or off the
CPU Cache ECC Check function. Configuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This field functions as an update loader integrated into the BIOS to supply
the processor with the required data. When set to [Enabled], the BIOS loads
the update on all processors during system bootup. Configuration options:
[Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default setting [Auto] allows the system to detect a PS/2 mouse at startup.
If a mouse is detected, the BIOS assigns IRQ12 to the PS/2 mouse.
Otherwise, IRQ12 can be used for expansion cards. When you set this field
to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse is detected
at startup. Configuration options: [Enabled] [Auto]
CAUTION! Refer to the CPU documentation before setting this field.
A very high core voltage may severely damage the CPU.