Asus A7V266-M Computer Hardware User Manual


 
ASUS A7V266-M motherboard user guide
67
4.5.1 Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before the
power interruption. Configuration options: [Disabled] [Enabled] [Previous
State]
PWR Up On External Modem Act [Disabled]
The computer may be powered up the computer if the external modem
receives a call while the system is in Soft-off mode. Configuration options:
[Disabled] [Enabled]
Wake On LAN or PCI Modem [Disabled]
When set to [Enabled], the system through a network or a PCI modem. This
feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
Power Up by USB [Disabled]
When set to [Enabled], the system powers up through a USB device. This
feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
NOTE! The computer cannot receive or transmit data until the computer
and applications are fully running. Thus, connection cannot be made on
the first try. Turning an external modem off and then back on while the
computer is off sends an initialization string that turns system power on.