Asus A8V-E SE Computer Hardware User Manual


 
ASUS A8V-E SEASUS A8V-E SE
ASUS A8V-E SEASUS A8V-E SE
ASUS A8V-E SE
1-131-13
1-131-13
1-13
1.7 System memory
1.7.11.7.1
1.7.11.7.1
1.7.1
OverviewOverview
OverviewOverview
Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1.7.21.7.2
1.7.21.7.2
1.7.2
Memory ConfigurationsMemory Configurations
Memory ConfigurationsMemory Configurations
Memory Configurations
You may install 64MB, 128MB, 256 MB, 512 MB and 1 GB unbuffered ECC
or non-ECC DDR DIMMs into the DIMM sockets using the memory
configurations in this section.
For dual-channel configuration, the total size of memory module(s)
installed per channel must be the same for better performance
(DIMM_A1+DIMM_A2=DIMM_B1+DIMM_B2).
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. Refer to the DDR400 Qualified Vendors List
on the next page for details.
Due to chipset resource allocation, the system may detect less than
4 GB of system memory when you installed four 1 GB DDR memory
modules.
Due to chipset limitation, DIMM modules with 128 Mb memory chips
or double-sided x16 memory chips are not supported in this
motherboard.
Due to CPU limitation, install on Channel B slots for a single-channel
memory configuration.
ChannelChannel
ChannelChannel
Channel
Sockets Sockets
Sockets Sockets
Sockets
Channel A DIMM_A1 and DIMM_A2
Channel B DIMM_B1 and DIMM_B2
A8V-E SE
®
A8V-E SE 184-pin DDR DIMM sockets
DIMM_A
1
DIMM_A
2
DIMM_B
1
DIMM_B
2