Filter
Top Products
2-202-20
2-202-20
2-20
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
Selecting a very high CPU frequency may cause the system to become
unstable! If this happens, revert to the default setting.
Spread Spectrum [Auto]
Enables or disables the clock generator spread spectrum.
Configuration options: [Disabled] [Enabled] [Auto]
PCIEx clock Sync. to CPU [Enable]
Enables or disables the PCI Express™ synchronous clock to the CPU.
Configuration options: [Disabled] [Enabled]
PCIEx Clock [XXX] (value is auto-detected)
Allows you to set the PCI Express clock frequency. This item is
user-configurable only when the
PCIEx clock Sync. to CPUPCIEx clock Sync. to CPU
PCIEx clock Sync. to CPUPCIEx clock Sync. to CPU
PCIEx clock Sync. to CPU item is
set to Disabled. The BIOS detects the default value of this item. Press
<Enter> then key-in desired PCI Express clock frequency within range.
PCI clock Sync. to CPU [Enable]
Enables or disables the PCI synchronous clock to the CPU.
Configuration options: [Disabled] [Enabled]
PCI Clock [XXX] (value is auto-detected)
Allows you to set the PCI clock frequency. This item is
user-configurable only when the
PCI clock Sync. to CPUPCI clock Sync. to CPU
PCI clock Sync. to CPUPCI clock Sync. to CPU
PCI clock Sync. to CPU item is
set to Disabled. The BIOS detects the default value of this item. Press
<Enter> then key-in desired PCI clock frequency within range.
CPU Clock [XXX] (value is auto-detected)
Displays the frequency sent by the clock generator to the system bus
and PCI bus. The default value of this item is auto-detected by the
BIOS. Use the <+> and <-> keys to adjust the CPU frequency.
CPU Multiplier [Auto]CPU Multiplier [Auto]
CPU Multiplier [Auto]CPU Multiplier [Auto]
CPU Multiplier [Auto]
Sets the CPU multiplier. The configuration options vary depending on the
type of CPU installed. Configuration options: [Auto] [x4] [x4.5] [x5] [x5.5]
[x6] [x6.5] [x7] [x7.5] [x8] [x8.5] [x9] [x9.5] [x10] [x10.5] [x11]