Filter
Top Products
2-4
Chapter 2: Basic Installation
2. Use the hand slot to slide the metal cover toward the rear panel. Lift
the metal cover after the side hooks are disengaged from the HDD
tray rail and optical drive shield.
Set your hard disk drive as Master device before connecting the IDE cable
and power plug. Refer to the HDD documentation on how to set the drive
as a Master device.
2.4 Installing a hard disk drive
The DiGiMatrix system supports one UltraATA133 IDE hard disk drive
(HDD).
To install a hard disk drive:
1. Remove the two metal cover screws. Keep the screws for later use.
1
2
Hand slot
Side hooks
Side hooks