Filter
Top Products
Chapter 2: Hardware setup
2-16
2.6 Installing or removing an expansion card
The chassis is designed with a screwless expansion slot frame on the rear
panel. This design feature allows you to install or remove an expansion
card in less steps.
2. Slide out the metal bracket
opposite the PCI slot where you
wish to install the expansion card.
You may use a flat-head
screwdriver to easily remove the
bracket.
2.6.1 Installing a standard size expansion card
To install an expansion card:
1. Release the card lock.
a. Press the card lock lever.
b. The card lock flips up.
Make sure to unplug the power cord before installing or removing
expansion cards. Failure to do so may cause physical injury, and
damage to the card and motheboard components!
2
Card lock
Card lock lever
1a
1b