Filter
Top Products
9ASUS Pocket Wireless Access Point (WL-330)
English
Quick Start Guide
5. Enter the network name (SSID) of
the wireless network you wish to
connect.
6. Select the channel of the wireless
network you wish to connect.
10. Configure the Ethernet adapter
WEP encryption settings.
Click OK when done.
7. Set the Network Type. Select Infrastructure if you wish to connect to an
AP. Select Ad Hoc if you wish to connect to another wireless device.
8. Enable or disable MAC Cloning.
9. Click the WEP link or the Encryption tab.
NOTE. You may select the
channel if you set the
device in an Ad-hoc
network environment. In
Infrastructure network, the
channel is automatically
selected.
IMPORTANT! Change the
device WEP encryption
settings only when your
selected network has an
enabled WEP encryption.
• The SSID and WEP encryption keys of the ASUS Pocket Wireless AP
must be the same with that of the AP or wireless device to establish
connection.
• If you are trying to connect to an AP (Infrastructure), make sure the MAC
address of the ASUS Pocket Wireless AP is included in the AP
authorization table.