Filter
Top Products
50
LED projector E-Manual
DRAFT 2 12/17/12
DRAFT 2 12/17/12
DRAFT 2 12/17/12
Using EZLink to project from your input device
1. Turn on your input device then connect to the LED projector
using a USB cable.
2. Turn on the LED projector. If the Media Center does not
automatically launch, press on the control panel.
3. Select EZLink. Wait for the USB icon to appear onscreen to
verify that the LED projector was successfully connected to your
input device.
4. From your input device, select the EZ-USB Mirror-only icon to
start projecting from your input device to the LED projector.