Filter
Top Products
52
LED projector E-Manual
DRAFT 2 12/17/12
DRAFT 2 12/17/12
DRAFT 2 12/17/12
Installing the EZ Display app
You need to install the EZ Display app so you can project from your
input device using WiFi. Download this application online using any
of the following options:
• If you are using an Android OS, download EZ Display from
Google Play Store.
• If you are using an iOS, download EZ Display from iStore.
• If you are using a Windows OS, download the EZ display
app from the link that appears after connecting to the Wi-Fi
dongle.
Using Display by AP mode
1. Connect the Wi-Fi dongle to your LED projector to launch the
Media Center.
NOTE: If the Media Center does not automatically launch, press
then select EZLINK-WIFI>Display by AP mode.
2. Enable the WiFi connection in your input device. Select ASUS
B1 (default SSID) or the new SSID you congured for the B1M
LED projector.
3. Type the password on your input device as shown on the LED
projector to enable the AP mode connection.
4. Open EZ Display on your input device.