Asus E2938 Computer Hardware User Manual


 
ASUS Commando
4-19
SB Chipset Voltage [Auto]
Allows you to select the SB chipset voltage.
Conguration options: [Auto] [1.050V] [1.075V] [1.100V] [1.125V] [1.150V] [1.175V]
[1.200V] [1.225V]
4.4.2 ASUS C.G.I. [Auto]
Allows you to set ASUS C.G.I. Conguration options: [Auto] [Enabled] [Disabled]
4.4.3 Static Read Control [Auto]
Allows you to set Static Read Control Conguration options: [Disabled] [Auto]
[Fast] [Faster]
4.4.4 Congure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items. The following sub-items
appear when this item is set to [Disabled].
Conguration options: [Enabled] [Disabled]
DRAM CAS# Latency [5]
Controls the latency between the SDRAM read command and the time the data
actually becomes available. Conguration options: [3] [4] [5] [6]
DRAM RAS# to CAS# Delay [6 DRAM Clocks]
Controls the latency between the DDR SDRAM active command and the read/write
command. Conguration options: [2 DRAM Clocks]~[6 DRAM Clocks]
DRAM RAS# Precharge [6DRAM Clocks]
Controls the idle clocks after issuing a precharge command to the DDR SDRAM.
Conguration options: [2 DRAM Clocks]~[6 DRAM Clocks]
DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks]
Conguration options: [4 DRAM Clocks]~[18 DRAM Clocks]
DRAM Write Recovery Time [6 DRAM Clocks]
Conguration options: [2 DRAM Clocks]~[6 DRAM Clocks]
DRAM TRFC [42 DRAM Clocks]
Conguration options: [20 DRAM Clocks] [25 DRAM Clocks] [30 DRAM Clocks]
[35 DRAM Clocks] [42 DRAM Clocks]